According to Dutchsinse via Earthquake 3D and the USGS, a 9+ Earthquake has just struck Africa; no verification. This just popped on Earthquake3D from the USGS feed — and then popped off again. Gone with no news…. IRIS shows nothing.. USGS showing nothing.. EMSC showing nothing … charts showing nothing… something strange going on here.
3 posters
Dutchsinse: 9+ Earthquake Africa? Gone In 60 Seconds – Need Verification
Carol- Admin
- Posts : 31769
Join date : 2010-04-07
Location : Hawaii
- Post n°1
Dutchsinse: 9+ Earthquake Africa? Gone In 60 Seconds – Need Verification
Carol Mon Nov 19, 2012 12:21 pm
_________________
What is life?
It is the flash of a firefly in the night, the breath of a buffalo in the wintertime. It is the little shadow which runs across the grass and loses itself in the sunset.
With deepest respect ~ Aloha & Mahalo, Carol
lawlessline- Posts : 699
Join date : 2010-04-23
Age : 51
- Post n°2
Re: Dutchsinse: 9+ Earthquake Africa? Gone In 60 Seconds – Need Verification
lawlessline Mon Nov 19, 2012 1:24 pm
This Posted by Dutchseinse yesterday.
GOOD NEWS! The 9.0M+ earthquake which showed up on the USGS feed ---- most likely some kind of anomaly or error in the feed ...
NO waves detected.. NO charts showing any movement (aside from the other regular EQ activity)... NO reports from locals.. NO msm reports...
All that being said.. something caused a 9.0 and a 5.0M to show on the feed.. then it was revised to a GREATER than 10.0M.. then disappeared off the feed.
Too strange.
t
GOOD NEWS! The 9.0M+ earthquake which showed up on the USGS feed ---- most likely some kind of anomaly or error in the feed ...
NO waves detected.. NO charts showing any movement (aside from the other regular EQ activity)... NO reports from locals.. NO msm reports...
All that being said.. something caused a 9.0 and a 5.0M to show on the feed.. then it was revised to a GREATER than 10.0M.. then disappeared off the feed.
Too strange.
t
devakas- Posts : 2038
Join date : 2010-04-10
- Post n°3
Re: Dutchsinse: 9+ Earthquake Africa? Gone In 60 Seconds – Need Verification
devakas Mon Nov 19, 2012 2:00 pm
lawlessline wrote:This Posted by Dutchseinse yesterday.
GOOD NEWS! The 9.0M+ earthquake which showed up on the USGS feed ---- most likely some kind of anomaly or error in the feed ...
NO waves detected.. NO charts showing any movement (aside from the other regular EQ activity)... NO reports from locals.. NO msm reports...
All that being said.. something caused a 9.0 and a 5.0M to show on the feed.. then it was revised to a GREATER than 10.0M.. then disappeared off the feed.
Too strange.
t
t
maybe wm servers were rebooted and some data processes ran before cleanup procedures applied. yes strange